Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 110 / 261

94
5. Specify the IP address of the remote node and the corresponding FINS
node address. To do so, enter the IP address, a space, and the FINS node
address (0 to 127) in this order.
Enter New Address and Name: 123.45.67.89 14
(0) 123.45.67.89 14
(1)
(2)
.
.
(9)
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
6. Select 1, and specify the IP address and the corresponding FINS node
address in the same way as Step 5.
Then, continue with this setting procedure for the rest of the conversion
table ((2) and onwards).
Example:
(0) 123.45.67.89 14
(1) 123.45.67.77 15
(2) 123.45.67.78 16
(3) 123.45.67.79 21
(4) 123.45.67.80 22
(5) 123.45.67.21 31
(6) 123.45.67.25 32
(7) 123.45.67.28 33
(8) 123.45.67.11 40
(9) 123.45.67.12 41
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
•
The screen only displays (0) to (9) as shown in the figure above.
•
To specify the line next to (9) (eleventh line), select “Add Line (10).”
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13): 10
Enter New Address and Name:
•
If an IP address and FINS node address are entered, the display is changed as
shown below.
Enter New Address and Name: 123.45.67.13 42
(0) 123.45.67.13 42
(1)
(2)
.
.
(9)
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
•
Then, select the line on which an IP address and host name are to be entered
(or select “Add Line (10)”), and enter the IP address and host name. Continue
with this setting procedure as required.
•
To delete data from a line, select “Delete Line (0-9)”, enter the line number (0 to
9), and press ENTER. When “Enter New Address and Name:” is displayed,
press ENTER. The data is deleted from the line.
Setup Software Operation
Section 7-6