207
NT20 Status Control
Section 5-4
• Program Operation
1,2,3...
1.
The PT status control bits are set as shown below when bit 09002 turns
OFF. This command block is not executed until bit 09003 is ON.
Screen display (bit 15)
1 (ON)
Continuous buzzer (bit 13)
1 (ON)
The NT20 continuous buzzer sounds.
2.
The PT status control bits are set as shown below when bit 09003 turns
OFF.
Screen display (bit 15)
1 (ON)
Intermittent buzzer (bit 12)
1 (ON)
The NT20 intermittent buzzer sounds
3.
The PT status control bits are set as shown below when both bits 09002
and 09003 turn ON.
Continuous buzzer (bit 13)
0 (OFF)
Intermittent buzzer (bit 12)
0 (OFF)
The NT20 buzzer stops.
@MOV(21)
#A000
09002
@MOV(21)
#9000
(1)
Display screen, sound buzzer continuously
PT status control word
(2)
Display screen, sound buzzer intermittently
PT status control word
@ANDW(34)
103
09002
(3)
PT status control word
"0" set for continuous and intermittent buzzer
sounds only
PT status control word
#CFFF
103
103
09003
09003
09003
103
Summary of Contents for NT20
