![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538184.webp)
163
Numeral Setting
Section 4-8
Set the number of digits in the numerical values that can be input. A max-
imum of 8 digits (total of integer and decimal fraction parts) can be set.
However, if there is a sign display, the maximum number of digits for neg-
ative values will be seven.
• Upper/Lower Limits
Set the upper limit and lower limit separately. The maximum number of dig-
its in the set values is eight (or seven if there is a sign display).
When the upper limit value and lower limit value are set as negative values,
set “F” as the eighth digit.
Example: Upper limit value or lower limit value is “–123”
→
F0000123.
• Display Attributes
Set attributes in the same way as for numeral display. For details, see
Nu-
merals Which Can Be Displayed
on page 145.
Restrictions and Additional Settings for Thumbwheel Type Numeral Settings
There are the following restrictions and additional items to set when creating
thumbwheel type numeral settings.
• Number of Input Digits for Positive Values When There Is a Sign Display
When a sign display is set for a thumbwheel type numeral setting, a max-
imum of 7 digits can be input for positive values.
• Display Size
One of two sizes can be selected: “small” in which each digit comprises
two touch switch units, and “medium”, in which each digit comprises three
touch switch units. Note that if “small” is selected the area in which the nu-
merical value is displayed is also the touch switch input area.
• Shape (End Plates)
Set which of the two shapes shown below will be used. One has “end
plates” at right and left sides and the other does not.
• Restrictions on Display Attributes
The following restrictions apply to display attributes.
Character type:
Wide size only
Character enlargement:
Standard only,
regardless of the display size specification
Zero suppress:
No zero suppression only
Refer to
Numerals Which Can Be Displayed
on page 145.
With
Without
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Summary of Contents for NT20
