![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538273.webp)
252
Responding to Displayed Error Messages
Section 7-2
Time Out
The connectors of the con-
necting cable have become
disconnected.
Reconnect the cable.
The PLC is stopped.
Make sure the PLC is able to
communicate with the NT20.
During transmission of one
command, a time lapse
exceeding 5 seconds is
detected.
Confirm the proper command
length.
Reconnect the cable.
NAK Received
(end code simulta-
neously displayed)
Noise caused data corruption
during communications.
Use a noise-resistant cable if
communications occurs in an
environment with high levels
of noise.
Error returned by host.
Check the end code by refer-
ring to the PLC operation
manual.
Unit No. Error
The unit # does not match that
set on the PLC.
Set the PLC unit # to “0”.
The PLC is transmitting incor-
rect data.
Check PLC operation.
Noise caused data corruption
during communications.
Use a noise-resistant cable if
communications occurs in an
environment with high levels
of noise.
FCS Error
The PLC is transmitting incor-
rect data.
Check PLC operation.
Noise caused data corruption
during communications.
Use a noise-resistant cable if
communications occurs in an
environment with high levels
of noise.
Message
Cause
Remedy
Summary of Contents for NT20
