![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538051.webp)
30
Connecting Link Adapters and RS-422A Converters
Section 2-3
Removal from a DIN Track
Remove the End Plates from the right and left of the Link Adapter, insert a flat
blade screwdriver into the catch at the bottom of the Link Adapter, and pull it
down to release the catch.
Mounting to a Control Panel
The control panel must be at least 2 mm (5/64 inch) thick. Drill two mounting
screw holes in a control panel and secure the Link Adapter with screws.
Note
The control panel must be at least 2 mm (5/64 inch) thick for a secure and
strong mount.
Specifications
The following tables list the NT-AL001 Link Adapter’s general and communica-
tions specifications.
General Specifications
(1.18)
30
21
100
(3.94)
110
(4.33)
2-M4 holes
Units: mm (inch)
(0.83)
Item
Specification
Dimensions
With RS-422A terminal block cover closed:
30
×
114
×
100.2 mm (W
×
H
×
D)
With RS-422A terminal block cover open:
30
×
114
×
119.5 mm (W
×
H
×
D)
Weight
200 g max.
Ambient tem-
perature
Operating
0 to 55
°
C
Storage
–20 to 75
°
C
Operating ambient humidity
10% to 90% (with no condensation)
Rated power supply voltage
+5 V
±
10%
(through pin 6 of the RS-232C connector)
Rated power supply current
150 mA max.
Inrush current
0.8 A max.
Insulation resistance
20 M
Ω
min., measured between the RS-422A termi-
nal signal lines and FG terminal (at 500 VDC)
Summary of Contents for NT20
