![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538101.webp)
80
Host Connections by RS-232C (NT20-ST128)
Section 2-8
Note
Unlisted pins are not used.
Note
For cable parts and the wiring method, refer to
Appendix C Transporting and
Storing PTs
on page 263.
Connecting to the Host
Computer
Use a cable that is compatible with the RS-232C connector of the host to con-
nect the NT20 and the host (see the example in the figure below).
In the example shown here, the cable connects the 9-pin connector of the
NT20 and 25-pin connector of the host. If the host has a 9-pin RS-232C con-
nector, use an RS-232C cable with 9-pin connectors at both ends.
!Caution
When making the connection, turn OFF the power to the NT20 and PLC
before disconnecting or connecting any connector.
!Caution
After connecting the communications cable, always secure it with the screws.
Otherwise the cable may disconnect, causing operation to fail.
Note
If using the +5 V supply of pin No.6, check first that the equipment that is to
receive the supply has a current capacity no greater than 150 mA. The +5 V
output of the NT20 is +5 V DC
±
5%, 150 mA max.
Do not use both port’s +5 V output at the same time.
6
+5 V output, 150 mA
max.
+5 V
→
9
Signal ground
SG (GND)
---
Connector
pin #
Signal name
Abbreviation
Signal direction
NT20
← →
Host
NT20
25-pin connector
Host Interface connector
(RS-232C, 9-pin type)
9-pin connector
RS-232C cable
Summary of Contents for NT20
