background image

 1

FrameSaver

 SLV 9820 Standalone Unit

Installation Instructions

Document Number 9820-A2-GN10-20

August 1999

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com
Select 

Library 

Technical Manuals 

FrameSaver Frame Relay Devices.

Select the following document:

9820-A2-GB20
FrameSaver SLV 9820 User’s Guide

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

FrameSaver SLV 9820 Models

There are two models of the FrameSaver 9820 product:

Model 9820-C – Central site model. Supports up to 120 PVCs.

Model 9820 – Remote site model. Supports up to 16 PVCs.

Package Checklist

Verify that your package contains the following:

FrameSaver SLV 9820 or 9820-C unit

Universal power supply with an attached cable and ferrite choke

Power cord appropriate for the wall-plug standard in your country (depends on
model ordered).

Summary of Contents for FrameSaver SLV 9820-C





















Reviews: