![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538070.webp)
49
Connecting to the RS-232C Port at the Host
Section 2-6
The following table shows the words allocated in the DM Area and the set-
tings.
m = D 100
×
unit number
Connecting to a CPU Unit
CV-series and CVM1/CV-series (-EV
@
) CPU Units
CVM1-CPU01-EV2/CVM1-CPU11-EV2/CVM1-CPU21-EV2
PLC Setup
When connecting to a CVM1/CV-series CPU Unit, set the following communi-
cations conditions for the PLC Setup.
Note
Set the Host Link baud rate at 9,600 bps or 19,200 bps with the memory
switch at the NT20.
Either set PLC Setup directly from a Programming Device (e.g., SYSMAC
Support Software), or transmit the PLC Setup made at a Programming Device
to the CPU Unit.
For details on the PLC Setup, refer to the
SYSMAC CVM1/CV500/1000/2000
Operation Manual: Ladder Diagrams
(W202-E1-
@
).
Allocated DM word
Value
Settings
Port 1
Port 2
m
m+10
8000
Host Link mode, 2 stop bits, even parity, data
length 7 bits
m+1
m+11
0000
Baud rate: 9,600 bps.
0007
Baud rate: 19,200 bps.
0008
Baud rate: 38,400 bps.
0009
Baud rate: 57,600 bps.
000A
Baud rate: 115,200 bps.
m+2
m+12
0000
Transmit delay time 0 ms.
m+3
m+13
0000
No CTS control Unit No.0 for Host Link
Item
Setting at Host
Baud rate
Set the same baud rate as set at the NT20 (See note.)
Stop bits
2 stop bits
Parity
Even
Data length
ASCII 7 bits
Unit #
00
Summary of Contents for NT20
