![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538287.webp)
266
Making the Cable
Appendix D
5.
Wrap vinyl tape over the cut off end of the shielding wire.
Soldering
1.
Slide heat-shrink tube over each wire.
2.
Pre-solder each wire and connector terminal.
3.
Solder each wire to each connector terminal.
4.
Push the heat shrink tube over the soldered joint and heat the tube to shrink it in place.
Hood Assembly
Assemble the connector hood as shown below.
40 (1.57) (RS-232C)
5
25 (0.98) (RS-422A)
(1)
(2)
(3)
(4)
(5)
Units: mm (inch)
Vinyl tape
(0.19)
Soldering iron
Heat-shrink tube
(F, 1.5 mm dia.,
l
= 10 mm)
1 mm
Heat-shrink tube
Aluminum foil tape
End connected to FG
End not connected to FG
Summary of Contents for NT20
