![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538132.webp)
111
Various System Settings
Section 3-8
3-8-5
Support Tool Mode Setting (NT20-ST121-E)
By setting “Tool Mode” to “NT20M”, the NT20 can be used in the same way as
the conventional NT20M/NT20S, and it becomes possible to use the NT
Series Support Tool (version 2.
@
).
However, the following restrictions apply when “NT20M” is set:
• Version 5 of the direct connection function cannot be used.
• The PT type setting must be “NT20M”.
• High-speed data transfer with the Support Tool is not possible.
• It is not possible to transfer the direct information alone.
• When screen data transmission is in screen units, simultaneous transmis-
sion of multiple screens is not possible. An attempt to transmit multiple
screens may destroy the screen data.
• When screen data transmission is in screen units, transmission with verifi-
cation set is not possible.
• The image data memory must be initialized before starting transfer in file
units.
• Screen data for RS-232C communications cannot be used.
(NT Link (1:N))
DIP-SW2-2 is OFF.
(Host link)
(NT Link (1:1))
(NT Link (1:N))
Automatic Reset
Unit No.
No
7
(2/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Comm. Speed
Comm. Port
Standard
Port B
Language
English
Automatic Reset
Baud Rate
No
9600bps
(2/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Comm. Port
Port B
Language
English
Automatic Reset No
(2/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Comm. Port
Port B
Language
English
Automatic Reset
Unit No.
No
7
(2/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Comm. Speed
Comm. Port
Standard
Port B
Language
English
Summary of Contents for NT20
