![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538045.webp)
24
Connecting Link Adapters and RS-422A Converters
Section 2-3
2-3
Connecting Link Adapters and RS-422A Converters
This section describes the installation of the NT-AL001 Link Adapter and
CJ1W-CIF11 RS-422A Converter, including the external dimensions, proce-
dure for mounting and removal, and specifications. Refer to this information
when designing the control panel. For further details, refer to the
Instruction
Sheet
supplied with the NT-AL001 or CJ1W-CIF11.
2-3-1
Connecting an CJ1W-CIF11 RS-422A Converter
The CJ1W-CIF11 RS-422A Converter connects directly to the NT20’s serial
port A or B and converts RS-232C communications to RS-422A or RS-485.
The NT20 supplies power to the RS-422A Converter through pin 6 of the RS-
232C connector, so an external power supply is not required.
Note
1.
The RS-232C connector is not insulated from the RS-422A/RS-485 con-
nector within the CJ1W-CIF11 RS-422A Converter. If there are concerns
about differences in ground potential or noise, we recommend using the
NT-AL001 Link Adapter.
2.
Always turn OFF the NT20’s power supply before installing/removing a RS-
422A Converter or connecting/disconnecting cables.
3.
Always discharge any static electricity by touching a grounded object be-
fore installing the RS-422A Converter or connecting cables.
Specifications
General Specifications
RS-232C Connector
Item
Specification
Dimensions
18.2
×
34.0
×
38.8 mm (W
×
H
×
D)
Weight
20 g max.
Ambient operating temperature
0 to 55
°
C
Ambient storage temperature
–20 to 75
°
C
Ambient operating humidity
10% to 90% (with no condensation)
Rated power supply voltage
5 V
(Supplied from pin 6 of the RS-232C connec-
tor.)
Current consumption
40 mA max.
Operating atmosphere
No corrosive gases
Vibration resistance
Same as NT20 Series.
Shock resistance
Same as NT20 Series.
Isolation method
Not isolated
Maximum communications distance 50 m (Use the NT-AL001 if the total communications distance exceeds 50 m.)
Connector Pin Arrangement for
RS-232C Port
Pin number
Signal
1
FG
2
RD
3
SD
4
CS
5
RS
6
+5V
7, 8
NC
9
SG
Hood
NC
Summary of Contents for NT20
