![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538119.webp)
98
Setting the Conditions of Communications with the Host by Using the Memory Switches
Section 3-5
To set and quit the menu, press the [WRT & EXIT] touch switch. To quit with-
out setting, press [Quit]. The run mode will be established.
3-5-6
Selecting the Automatic Reset Function
The “Automatic Reset” memory switch is used to set whether or not the com-
munications are automatically reset after the occurrence of a communications
error.
The factory setting has been made at “No”.
Select the baud rate of the communications with the PLC by the menu opera-
tion from the System Menu as described below.
Automatic Reset
Unit No.
No
7
(2/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Comm. Speed
Comm. Port
Standard
Port B
Language
English
Repeatedly pressing the
“Unit No.” touch switch
cycles through the numbers
that can be set.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
Select “Maintenance Mode”.
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
DIP-SW Status
Init. Memory
Memory Switch
Select “Memory Switch”.
Comm. Type
Key Sound
Buzzer Sound
Host Link
OFF
Bk light Off
Tool Mode
OFF
None
(1/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
NT20S
Select “Page”.
Summary of Contents for NT20
