Omron NT20, User Manual

Page: 129 / 311

108
Various System Settings Section 3-8
Types of Buzzer Sounds
The following buzzer sounds can be set.
• Continuous sound: The buzzer continues to sound.
• Intermittent sound: The buzzer sounds intermittently at constant intervals.
Note If both the continuous buzzer and the intermittent buzzer are instructed by the
Host, the continuous buzzer will sound.
Setting the Buzzer Use the memory switches to set whether or not the buzzer sounds when the
buzzer sound has been instructed by the Host or with a screen attribute or
when an error has occurred.
The factory setting is “ON”, which means that the buzzer will sound when a
command is received from the host, when a screen for which the buzzer
attribute is set is displayed, and when errors occur.
Set the buzzer sound by the menu operation from the System Menu as
described below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
Select “Maintenance Mode”.
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
DIP-SW Status
Init. Memory
Memory Switch
Select “Memory Switch”.
Comm. Type
Key Sound
Buzzer Sound
Host Link
OFF
Bk light Off
Tool Mode
OFF
None
NT20S
(1/2)
Quit
[ MEMORY SW MENU ]
Page
WRT
&
EXIT
Repeatedly pressing the
“Buzzer Sound” touch switch
cycles through the setting
options “ON”, “ERR ON”, and
“OFF”, in that order.