National Instruments
™
, ni.com
™
, and PXI
™
are trademarks of National Instruments Corporation. Product and company names mentioned herein are
trademarks or trade names of their respective companies.
322984A-01
©
Copyright 2000 National Instruments Corp. All rights reserved.
December 2000
INSTALLATION GUIDE
TB-2715 T
ERMINAL
B
LOCK
This installation guide describes how to install and connect signals to the
TB-2715 terminal block for use with PXI-653
X
and PXI-660
X
modules.
Use the TB-2715 terminal block to connect to the signals of a PXI-653
X
or
PXI-660
X
module. Connect your signals to the screw terminals housed in
the terminal block then install the TB-2715 to the PXI front panel.
What You Need to Get Started
To set up and use the TB-2715, you will need the following:
❑
TB-2715 terminal block
❑
Quick-reference labels for PXI-653
X
and PXI-660
X
❑
One of the following:
–
PXI-653
X
module
–
PXI-660
X
module
❑
653X User Manual
or
660X User Manual
❑
0.10 in. slotted screwdriver
❑
Number 1 Phillips screwdriver
❑
Wire cutters
❑
Wire insulation stripper
Connecting Signals to Your Terminal Block
Refer to Figure 1 as you perform the following steps to connect signals
from the peripheral device to the TB-2715. For more information about
connecting signals to your terminal block, see your
653X User Manual
or
660X User Manual.
Summary of Contents for TB-2715
Page 6: ......
