Omron NT20, User Manual

Page: 155 / 311

134
Screen Creation Procedure Section 4-1
4-1 Screen Creation Procedure
Follow the procedure shown below to create screens for the NT20.
The following gives the procedure assuming that the setting for the PT has
been completed. The operating procedure for the Support Tool is not given
here. For the operating procedure for the Support Tool, refer to the
NT-series
Support Tool Version 4.8 for Windows Operation Manual (Cat. No. V061-E1-
@ ).
Designate a work file.
Creating a New Screen
Tool Setting (PT model)
Set the PT model as follows:
NT20S: Set NT20S.
System Setting (Memory Switch Setting)
Setting for PT Status Control/Notify Area
Correcting an Existing File
File Designation
Importing DOS Version Data
File Designation
Designate the work file to be data converted.
NT20: Set NT20.
Set the memory switches that
determine the basic operation of the
PT. The numeral/character string/bit
memory table entry settings should
also be made at this stage.
Allocate words for the PT status control area
and PT status notify area, necessary for the
direct connection function, in the host.
For details, refer to
5-1-3 NT20 Status
Control and Notification to PLC .