![background image](http://html.mh-extra.com/html/omron/nt20/nt20_user-manual_744538065.webp)
44
Connecting to the RS-232C Port at the Host
Section 2-6
2-6
Connecting to the RS-232C Port at the Host
The method for connecting directly between the RS-232C port of the PT and
the RS-232C port of the host is as follows.
The following discussion is focused on the connection method to OMRON
PLCs.
Direct Connection between RS-232C Ports with RS-232C Cable
This is the easiest connection method. Depending on the host to which the
connection is to be made, it may be possible to use OMRON cables with con-
nectors.
Note
The CS/CJ-series CPU Unit cannot be connected with the 1:1 NT link
method. Use the 1:N NT link method instead of making a 1:1 connection. For
details, refer to
Using the 1:N NT Link
on page 60 or
Using the High-speed
1:N NT Links
on page 65.
2-6-1
Host Types and Settings
The types of host that can be connected to a PT by using the RS-232C ports
of both devices, and the settings to be made at the host, are described here.
Using the Host Link Method
Compatible Hosts
Some models and series of OMRON PLCs have the Host Link function built
in.
In the CS-series (including the CS1-H PLCs), CJ-series, and CQM1H PLCs,
the Host Link method can be used by installing a Serial Communications
Board or Unit. In addition, some C200HX/HG/HE(-Z)E have an integral CPU
Unit that can be connected in the Host Link method by installing a Communi-
cations Board.
Check the model and series of the PLC, the type of installed Serial Communi-
cations Board, Serial Communications Unit, or Host Link Unit before making a
connection.
The hosts that can be connected to the NT20 by the Host Link method using
the RS-232C ports of both Units are indicated in the table below.
RS-232C cable (15 m max.)
Host
NT20
PLC
Series
Units with Built-in Host Link
Function
CPU Units Connectable with
Host Link Units or Expansion
Communications Board
Host Link Unit/
Communications
Board
Connectable
to
CS Series
CS1G-CPU42/43/44/45-EV1
CS1H-CPU63/64/65/66/67-EV1
CS1G-CPU42H/43H/44H/45H
CS1H-CPU63H/64H/65H/66H/
67H
CS1G-CPU42/43/44/45-EV1
CS1H-CPU63/64/65/66/67-EV1
CS1G-CPU42H/43H/44H/45H
CS1H-CPU63H/64H/65H/66H/
67H
CS1W-SCU21
CS1W-SCB21
CS1W-SCB41
CS1G
CS1H
CS1G-H
CS1H-H
CJ Series
CJ1G-CPU44/45
CJ1G-CPU44/45
CJ1W-SCU41
CJ1G
Summary of Contents for NT20
