Omron CX-PROGRAMMER V9, Operation Manual

Page: 423 / 536

PART 2: CX-Server PLC Tools
GLOSSARY OF TERMS – CX-Server PLC Tools OMRON
CX-Server PLC Tools Page 180
Refer also to Server application.
2. A Server is the central processing point of a Network which is accessible to all
computers. Networks affect CX-Server in that further associated options are
available if the computer Network is connected.
Signed Decimal A data format supported by CX-Server.
SIOU Special Input /Output Unit.
Slave A device which receives data or instructions from a master device.
Slots Free areas within a rack to which units can be fixed.
Software switches Areas of memory employed by an SIO unit used to set operating parameters (similar in
manner to a hardware switch).
Space parity The parity bit is always set to 0.
Special Input /Output Unit A unit designed for a specific purpose.
SRM1 device type An OMRON PLC device supported by CX-Server.
Step Area An area of PLC memory containing a flag indicating the status of steps used within a
program.
Stop bits Bits indicating the end of transmission of each set of data bits; normally one or two bits,
they indicate the delay time between sending successive characters down the line.
Symbol An address that has been given a name to make the address information more flexible.
Symbols are inherited by CX-Server by the invoking application.
SYSMAC LINK OMRON high speed industrial network (either co-axial or fibre optic).
SYSMAC NET OMRON high speed optical LAN which can be of type C SYSMAC NET or CV
SYSMAC NET.
SYSMAC WAY OMRON network.
System area An area of memory used for controlling and managing a unit.
System configuration An arrangement of units, for example network, computers and PLCs.
Tagged database A file format supported by the CX-Server Import tool. The Tagged database is also an
export format of the CX-Server Import tool.
TAPI Telephony Application Programming Interface.
Target PLC The PLC to which information or instructions are directed.
Taskbar An integral part of Microsoft Windows which allows Microsoft Windows based
applications to be started. CX-Server tools are run from the Taskbar.
TCP/IP Transmission Control Protocol/Internet Protocol.
Temperature Controller An OMRON device.
Temporary Relay Area An area of PLC memory containing instructions which can be loaded at a later point for
use with other instructions.
Text 1. A file format supported by the CX-Server Import tool. The Text is also an export
format of the CX-Server Import tool.
2. A data format supported by CX-Server.
Timer area An area of PLC memory containing program timers and their related completion flags.
Toolbus A network, either C-Toolbus or CV-Toolbus, allowing communications with a device
via the serial COM port of a personal computer (in a similar manner to SYSMAC
WAY). Data is transmitted along the network in binary format.
Tools CX-Server is made up of four tools.
Topic The name of an aspect of a service application which identifies where a reference link
is to be incorporated; for example, within Excel the topic would be the name of the
worksheet to be used.
Transceiver A device which can receive and transmit data.
Transfer from PLC The transfer of a program or data to a host (either a computer or a programming device)
from a lower-level (or slave) device.