Oce PlotWave 750, Operation Manual

Page: 280 / 321

Handle errors at the reinforcement unit
Clear a tape jam in the reinforcement unit
Introduction
When a tape jam occurs in the reinforcement unit, an error message appears on the display.
Procedure
1.
Open the front door of the reinforcement unit
[137] Opening the front door of the reinforcement unit
2. Turn the two guide plates away from the pin roller and lock the two guide plates into their open
position.
[138] Open the guide plates
3. Remove all tape between the rollers and the knives.
Handle errors at the reinforcement unit
280 Chapter 7 - Maintain and troubleshoot the Océ PlotWave 750 system