Oce PlotWave 750, Operation Manual

Page: 236 / 321

Define the media type and media size
Purpose
To define the media type and media size of a media roll, cut sheet tray or manual feed.
When to do
After you insert a new media roll or cut sheet material.
Procedure
1.
Press the “Online” key on the printer operator panel to put the printer offline. The message
“Offline” is displayed in the status window. The green LED above the “Online” key is off.
2.
Press the left selection key to shift the focus to the media selection.
3. Use the arrow keys to select roll 1 to 6, cut sheet tray or Manual.
4. Press the right selection key to select the setting you want to define.
5. Use the arrow keys to scroll through and define the settings.
NOTE
Media sizes of both the DIN and ANSI media sizes are available. Use the arrow keys to select
either a DIN or ANSI format.
6.
Put the printer online again by pressing the “Online” key.
NOTE
You only adjust the settings on the printer operator panel when you alter the size or media type.
Define the media type and media size
236 Chapter 7 - Maintain and troubleshoot the Océ PlotWave 750 system