Oce PlotWave 750, Operation Manual

Page: 43 / 321

Select a language
Introduction
On the operator panel of the Océ PlotWave 750 printer, you can specify which language you want
to use to display printer information, such as status and error messages. By default, you can
choose between two languages, which are defined in the Océ Express WebTools for your system
by the Key operator (see
Change the regional settings on page 72 ).
The Océ PlotWave 750 supports a total of 20 languages.
Procedure
1.
Press the ‘Online’ key on the printer operator panel to put the printer offline. The message
‘Offline’ is displayed in the status window.
2.
Press the left selection key to shift the focus to the Language option. A shadow effect is used to
indicate that the focus is set to this option.
3. Activate the Language option by pressing the right selection key. The dotted line around the
current selection changes into a solid line and the small selection triangles next to the specified
language are no longer dimmed.
4. Use the arrow keys to switch between the two predefined languages.
5. The language-specific elements on the display are immediately customized to reflect your
language choice. Only the indicator for the language itself is in the alternative language. This way
you always know what your alternative language is.
6.
Put the printer online again by pressing the “Online” key. The printer now uses the selected
language.
Select a language
Chapter 2 - Introduction 43