Nustep TRS 4000, Service Manual

Page: 94 / 130

TRS 4000
support@nustep.com - (800) 322-4434 - (734) 769-3939 x 5
support@nustep.com - (800) 322-4434
Seat Assembly Removal / Installation
NOTE: These instructions are usually the first step if you have to work on
or replace the seat assembly.
Tools Required
Phillips screwdriver
3/8" wrench
1. Remove seat rail cap. 2. Remove seat rail bumpers.
3. Roll seat off of seat rail.
Keep upward pressure on front of seat to
prevent scratching end of seat rail.
5. To install, do steps in reverse order. No photo.
42081 Seat Assembly Removal 5-01-05
86
4. If you are going to work on the
seat, turn seat upside down and lay
it across rear of NuStep.
The horizontal position keeps parts from
sliding out of position.
The TRS 4000 seat assembly is heavy; it weighs 50 lbs (23 kg). To avoid injury or
damage to the product, use caution when removing or installing. Obtain assistance as
required. Use proper lifting technique.
!
CAUTION