Nustep TRS 4000, Service Manual

Page: 109 / 130

TRS 4000
support@nustep.com - (800) 322-4434 - (734) 769-3939 x 5
support@nustep.com - (800) 322-4434
Seat Release Bracket & Seat Release Spring & Nyliners
42091 Seat Release Brkt & Spring 5-1-05
Tools Required
5/32" hex key
Needle nosed pliers
Torque wrench
242 Loctite
Silicone or white grease
Safety glasses
1. Remove seat assembly. See Seat Assembly Removal instructions.
2. Remove seat release bracket by
removing front and rear shoulder
bolts (rear shown). 3. Remove seat release spring.
4. Replace seat release bracket or spring or Nyliners now (not shown).
Before installing, lubricate bracket along slots and where lever pin contacts
bracket (see old bracket).
101
NOTE: This instruction applies to units with S/N < 428341.
To avoid injury, and to
ensure safe operation of
this product, fasteners must
be tightened to the proper
torque. To avoid injury, wear safety
glasses.
Springs are under tension. To avoid
injury, or damage to the product, use
caution when removing or installing.
!
CAUTION
!
CAUTION
!
CAUTION