Nustep TRS 4000, Service Manual

Page: 81 / 130

TRS 4000
support@nustep.com - (800) 322-4434 - (734) 769-3939 x 5
support@nustep.com - (800) 322-4434
Footpedal Bearing Replacement
NOTE: NuStep Inc. can supply the bearings inserted into a new footpedal, see Parts List. Units
with S/Ns 411001-413367 have Footpedal 1999 with 4 bearings total, while S/Ns > 413368 have
Footpedal 2000 with 2 bearings total. This instruction shows Footpedal 2000. We recommend
using an arbor press to insert bearings. If you don’t have one, use the wood technique below.
Tools Required
Large flat head screwdriver
Hammer
Blocks of wood
Safety glasses
1. Remove footpedal. See Footpedal 1999 or Footpedal 2000 instructions.
2. Insert screwdriver against end of
bearing wall and gently tap out. Be
careful not to scar footpedal bore. 3. To insert outside bearing(s),
carefully tap into bore using a block
of wood and hammer.
Make sure bearing goes in equally, and
does not get skewed.
4. To insert inside bearing(s), use
wood to press bearing into bore
with downward pressure. 5. Install footpedal.
No photo.
Make sure bearing presses in equally, and
does not get skewed.
42043 Footpedal Bearing Replacement 5-01-05
73
To avoid injury, wear safety glasses.
!
CAUTION