Nustep TRS 4000, Service Manual

Page: 88 / 130

TRS 4000
support@nustep.com - (800) 322-4434 - (734) 769-3939 x 5
support@nustep.com - (800) 322-4434
Footpedal Support Tube Retaining Ring Removal
Note: This only applies to units with serial numbers of 411001 – 411943. Removing both lower
retaining rings helps reduce the overall operating tension of the NuStep. After removal, there
may be a slight gap between the footpedal support tube and the frame, and this is normal.
Tools Required
Snap ring pliers
Safety glasses (for removing ring)
1. Turn NuStep gently onto its left
side (from rider’s perspective). 2. Remove lower retaining ring from
left footpedal support tube inside
frame. Do not remove upper ring
near footpedal!
Note: After removing the ring, the shaft
may snap into the frame and there may
now be a gap on the outside between
the tube and the frame. This is normal
.
3. Turn NuStep gently onto its right
side.
No photo.
4. Remove lower retaining ring from
right footpedal support tube inside
frame. Do not remove upper ring
near footpedal!
No photo.
42047 FP Support Tube Retaining Ring Removal 5-01-05
80
The TRS 4000 is very heavy; it weighs
205 lbs (93 kg). To avoid injury, or
damage to the product, always obtain
assistance to move this product. Use
proper lifting technique.
To avoid injury, wear safety glasses.
!
CAUTION
!
CAUTION