Appendix A: List of alarms A-7
T ab le A-1: List of alarm s (co n tin ued )
M essage: Bad EEPROM
Description:
Occurs when the terminal fails to read and write to the
EEPROM on the control PCP.
• EEPROM is memory that does not require power to maintain
data.
• Data stored in EEPROM includes the Millennium Manager
and terminal telephone numbers.
Action:
Check the connectors to the control PCP.
If the problem continues:
1. Send the CDRs to the Millennium Manager.
2. Replace the control PCP.
3. Perform the INSTALL terminal-configuration routine, as de
scribed in Chapter 3.
1
2
* *
22
!
~
;
• :
:
: ■
_
Description:
Action:
Occurs when a terminal memory test, run in the idle state,
results in a checksum error, indicating memory corruption by:
•
a loss of supplementary power and super capacitor
backup, or
•
a control PCP firmware chip problem.
Perform a memory check by entering 636 or MEM from the
maintenance level menu.
If the problem continues:
1. Send the CDRs to the Millennium Manager.
2. Replace the control PCP.
3. Perform the INSTALL terminal-configuration routine, as de
scribed in Chapter 3.
Millennium multi-pay terminal installation, operation, and maintenance guide
Summary of Contents for Millennium multi-pay M1211
