Nortel Millennium multi-pay M1211, Installation, Operation And Maintenance Manual

Page: 227 / 350

Installing replaceable parts 7-51
9. If you want to remove the partition from inside the vali­
dator, remove the short pin on the left side of the valida­
tor and detach the coin rejection chute by gently
squeezing the sides together to free the tabs.
Note: The long pin attaches the upper and lower
runway covers to the validator body.
a) Locate the partition tab which extends through
the wall of the coin rejection chute. Refer to
Figure 7-43.
b) Bend the tab straight.
c) Slide the partition out and discard.
d) Slide the partition out and discard.
e) Re-attach the coin rejection chute to the vali­
dator body, making sure all the tabs are
inserted in the proper holes.
f) Re-insert the pin.
Figure 7-43: Locating the partition on the coin rejection chute
Rem oving
the coin
rejection
chute tab
Millennium multi-pay terminal installation, operation, and maintenance guide