Nortel Millennium multi-pay M1211, Installation, Operation And Maintenance Manual

Page: 13 / 350

xiv Table of contents
2 Mounting the terminal
Figure 2-1: Positioning the upper housing lock 2-5
Figure 2-2: Terminal backboard mounting holes 2-6
Figure 2-3: Key and tool needed to open the terminal housing 2-11
Figure 2-4: Multi-pay terminal housing in open position 2-12
Figure 2-5: Machine screw locations on the back of the terminal 2-13
Figure 2-6: Coin validator cable connections 2-14
Figure 2-7: Locating the validator retaining clip 2-15
Figure 2-8: Removing the coin validator from the retaining screw 2-16
Figure 2-9: Connecting the ISWs to the upper terminal block 2-17
Figure 2-10: PCP assembly cable connections 2-19
Figure 2-11: Removing the PCP assembly bracket 2-21
Figure 2-12: ID bezel screws also secures the clamp plate 2-23
Figure 2-13: Removing the clamp plate 2-24
Figure 2-14: Rubber stud pushes the quick access keys label 2-25
Figure 2-15: Access hole used when installing the number card 2-26
Figure 2-16: Reconnecting the upper terminal block 2-27
Figure 2-17: Replacing the external instruction card 2-28
Figure 2-18: Removing the vault door and coin box 2-29
3 Installing terminal software
Figure 3-1: Unlocking the terminal for the INSTALL routine 3-5
4 Operation codes interface
Figure 4-1: Example of an operation-code instruction card, front 4-2
Figure 4-2: Example of the operation-code instruction card, back 4-2
5 Maintenance-level interface
Figure 5-1: Unlocking the terminal to access the maintenance level 5-4
6 Troubleshooting strategies
Figure 6-1: The alarm process, from terminal to telco 6-2
Figure 6-2: Validator jam (Error 67 on craft interface) 6-6
Figure 6-3: Showing the coin rejection chute profile 6-7
Figure 6-4: Exploded view of the coin validator 6-8
Figure 6-5: Card service only, part 1 6-11
Figure 6-6: Card service only, part 2 6-12
Figure 6-7: Coin test errors, chart 1 6-13
Figure 6-8: Coin test errors, chart 2 6-14
Figure 6-9: CConnecting inside service wires to terminal block 6-17
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: January 1997