Installing replaceable parts 7-75
Installing
the rear
term inal
rain diverter
Describing
a) Place the rain diverter in the corner of the
rear housing assembly above the rear
terminal PCP, as shown in Figure 7-61.
b) Slide the rain diverter down behind the rear
terminal mount until the top of the rain
diverter is about one-quarter inch above the
oval hole in the back of the rear housing.
c) The wide side of the rain diverter fits against
the back of the housing assembly.
d) Tighten the rear terminal PCP retaining
screw.
6. When complete, reconnect the upper terminal block
onto the rear terminal PCP to reconnect the power and
close and lock the housing assembly. Refer to
Opening
the terminal,
if necessary.
inferred answer supervision
Millennium terminals require that answer supervision be
present so that billing records can be accurate. For lines that
do not have this feature, an IAS module is installed inside
the terminal.
The IAS module is installed in the Millennium multi-pay
terminal below the rear terminal PCP. The module Connects
between the telephone line and the rear terminal board.
Figure 7-62 shows the IAS module inside the rear housing.
Millennium multi-pay terminal installation, operation, and maintenance guide
Summary of Contents for Millennium multi-pay M1211
