3-10
Installing terminal software
If the terminal detects answer supervision,
this message
appears
on the VFD:
14. Press * and go to Step 15 after
this message
appears
on the VFD:
Failed test:
If the terminal does not detect answer
supervision,
this message
appears
on the VFD:
Go back onhook
Completed:
00
To continue, press &
Failed:
51
CAUTION
T
Failed answer supervision
If there is no answer supervision, do not cut the
power to the terminal or abort the INSTALL
process by closing the housing.
Either action would require you to restart the
INSTALL terminal-configuration routine from the
beginning.
If the CO test fails:
•
Use your butt-end test set to make a call.
•
When the call connects, listen for a click in the
handset or monitor the line with your digital meter
and watch for polarity reversal.
•
If answer supervision is not being supplied from
the CO, contact your CO support. Ask the CO
personnel to verify that the line has been set up
properly.
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
