7-50 Installing replaceable parts
To troubleshoot a validator jam or to remove the internal
partition that prevents such jams, the validator comes
apart, as shown in Figure 7-42.
Two steel pins, one on either side of the validator,
release the coin rejection chute and the upper and
lower runways. Refer to Figure 7-41.
Figure 7-42: Exploded view of the coin validator
Upper runway
c o v e i ^ /
t
.
Coin rejection
f
chute
Lower runway
cover
Note:
Shading indicates
depth; white is the
highest level
\
Validator
body
8. When you have removed the validator from the term i
nal, check to make sure the coin chute is clear. Clear it,
if necessary.
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
