4-6 Operation codes interface
When the session ends, the entered codes are sent to the
Millennium Manager along with your PIN. The Millennium
Manager checks that your PIN grants you access to the
terminal.
Reserved codes
Operation codes in the 900 to 999 range are terminal-status
indicators used to notify the Millennium Manager of events
during maintenance level sessions.
Only users with maintenance-level privileges can use these
reserved codes.
If you enter a reserved operation code but lack maintenance
level privileges,
this message
Not a valid op code
appears
on the VFD:
Try again
The message displays for 4.5 seconds, then
this message
Enter op c o d e : ■ ■ ■
appears
on the VFD:
♦=FIX, *=SAVE, #=STOP
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
