1-32 Describing the terminal
Describing the craft interface
This section outlines the craft interface for the Millennium
multi-pay terminal.
Although most administration of Millennium multi-pay
terminals is done by the Millennium Manager, craftspeople
must visit the terminals to perform maintenance
procedures. They use the craft interface to install software
into the terminals and troubleshoot problems.
The craft interface provides prompts on the VFD. You
communicate with the interface using the main keypad.
The craft interface resides on firmware, read-only memory,
in the terminal. The following is required before the craft
interface can be accessed:
• supplementary power
• an operational VFD
• an operational control PCP
Figure 1-17 points out the communication tools for the craft
interface.
Figure 1-17: Using the terminal to work with the craft interface
Use the volume
buttons to move
through the
maintenance-level
menus
♦ button erases VFD to
correct entry errors
Enter access codes
and menu commands
using main keypad
VFD displays
craft interface
menus and
messages
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
