Describing the terminal 1-13
the terminal downloads the call rate from the Mil
lennium Manager and displays the amount of
money needed for the initial call period.
•
If the caller inserted enough coins before dialing
the number, the terminal dials out immediately.
3. When the caller inserts the correct amount, the terminal
selects either the default carrier or the carrier chosen by
the caller and dials the call.
4. Once the call is answered, call supervision occurs. If the
terminal is configured to collect call records for coin
calls, a record would be started at this point.
5. When the caller hangs up, the terminal returns to the
idle state. Extra payment is not returned.
Figure 1-3 shows the terminal features which support coin
calls.
Figure 1-3:
coins to make a call
Coins inserted into
coin slot/validator entry
VFD displays
Credit: (amount already
deposited)
Initial and additional rates
Request for further deposit
Next-call button allows
multi-calls to use up coin
balance
Number can be
dialed before
or after the coins
are inserted
Handset must be off-hook
Coins collected
in coin box
(inside secured
coin vault)
Coins returned if call not
connected
Millennium multi-pay terminal installation, operation, and maintenance guide
Summary of Contents for Millennium multi-pay M1211
