7-22 Installing replaceable parts
4.
Slide the swivel assembly out of the housing.
5. Guide the armored cord and the handset leads, which
are in the same black sheathing, through the opening in
the housing.
6.
Remove the screw retaining the swivel clamp and ESD
strap to the swivel. Refer to Figure 7-13 to locate the
screw. The swivel clamp retains the lanyard end-fitting
of the armored cord to the swivel.
7.
Remove the swivel bushing from the swivel. Refer to
Figure 7-12.
8. Slide the end fitting on the armored cord out of its retain
ing slot.
9. Slide the armored cord and handset leads out of the re
taining slot in the swivel.
10. To replace the handset and swivel, reverse the preced
ing steps. Make sure the black sheathing is inserted into
the lanyard by at least an inch.
11. When complete, reconnect the power and close and
lock the housing assembly. Refer to
Opening the ter
minal,
if necessary.
Replacing the grounding strap
1. This procedure assumes you have followed the direc
tions in
Preparing the terminal for maintenance
and
Opening the terminal.
It is not necessary to disconnect
the power to perform this procedure.
2.
Refer to Figure 7-13 and loosen the mounting screw of
the upper housing lock that retains the grounding strap.
Remove the strap from beneath the lock.
3. Loosen the screw retaining the swivel clamp to the
swivel and remove the grounding strap from the swivel.
4. To replace the grounding strap, reverse the preceding
steps.
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
