manualshive.com logo in svg

Nikon 25385 - Capture NX - Mac, User Manual

The Nikon 25385 Capture NX software is a powerful tool for Mac users seeking to enhance their photography skills. With a user-friendly interface, this software allows users to easily edit, organize, and process their images. Download the free user manual from manualshive.com to explore all the features and maximize your creative potential.

Share
Download
background image

90

Chapter 13 — The Toolbar

|

Hand Tool

Hand Tool

The hand tool enables you to move within an image. Select this tool when viewing an image that does not 
fit in the image window. Click and drag to reposition the contents of the window. 

Double-click this tool to fit the current image to the editor so that the entire image fits into the space 
available.

Zoom Tool

The zoom tool is used to zoom into and out from an image. Select this tool and click on the image to zoom 
in. Hold the Alt key (Windows) or option key (Macintosh) and click to zoom out.

Double click on the zoom tool to zoom the current image to 100%.

Shortcut

H key

Temporarily switch to the hand tool when 
any other tool is active:

 Spacebar

Shortcut

Z key

Zoom in when any other tool is active: 

Ctrl + spacebar keys (Windows)

c spacebar keys (Macintosh)

Zoom out when any other tool is active: 

Ctrl + Alt + spacebar keys (Windows)

c  spacebar keys 

(Macintosh)

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Related manuals for 25385 - Capture NX - Mac

Canon Optura Pi Install Manual preview
Optura Pi
Brand: Canon Pages: 2
Yamaha MOTIF RACK ES Supplementary Manual preview
MOTIF RACK ES
Brand: Yamaha Pages: 37
Xerox DocuColor 45054549 User Addendum preview
DocuColor 45054549
Brand: Xerox Pages: 30
Native Instruments Reaktor Spark Manual preview
Reaktor Spark
Brand: Native Instruments Pages: 38
AMD AMD-8151 HyperTransport AGP3.0 Revision preview
AMD-8151 HyperTransport AGP3.0
Brand: AMD Pages: 16
Symantec PCANYWHERE - V12.1 User Manual preview
PCANYWHERE - V12.1
Brand: Symantec Pages: 321
EVGA drivers for video card Driver Manual preview
drivers for video card
Brand: EVGA Pages: 23
Hollow Sun Vox Continental Instructions Manual preview
Vox Continental
Brand: Hollow Sun Pages: 9
F-SECURE POLICY MANAGER PROXY - Administrator'S Manual preview
POLICY MANAGER PROXY -
Brand: F-SECURE Pages: 43
UNIBLUE RegistryBooster 2010 Product Manual preview
RegistryBooster 2010
Brand: UNIBLUE Pages: 11
LEI Extras FISHEASY ST - Addendum preview
FISHEASY ST -
Brand: LEI Extras Pages: 8
Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Getting Started preview
003A1-121111-1001 - AutoSketch v.9.0
Brand: Autodesk Pages: 130
Garmin 010-10844-00 - Mobile XT - GPS Software Owner'S Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 52
Samsung SC-X300L User Manual preview
SC-X300L
Brand: Samsung Pages: 116
KAPERSKY ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2004-2006 STANDARD EDITION Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2004-2006 STANDARD EDITION
Brand: KAPERSKY Pages: 75
KAPERSKY ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2000 ENTERPRISE EDITION Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2000 ENTERPRISE EDITION
Brand: KAPERSKY Pages: 130
Patton electronics ForeSight 6300 NMS Quick Start Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 8
Watchguard Firebox V10 End User Manual preview
Firebox V10
Brand: Watchguard Pages: 8

Brands by name

Popular brands

Load more brands