manualshive.com logo in svg

Nikon 25385 - Capture NX - Mac, User Manual

Share
Download
Nikon 25385 - Capture NX - Mac User Manual Download Page 138

136

Chapter 15 — Edit List

|

Develop Section

Active D-Lighting

Active D-Lighting

, available only for cameras that 

provide this functionality within the camera itself, was 
designed for photographing subjects where it is difficult to 
capture detail in both highlights and shadows. If Active D-
Lighting is enabled ion the camera when a photograph is taken, the image will be underexposed to 
preserver highlight information. If that image is later processed in Capture NX 2, Active D-Lighting will be 
applied to brighten the shadows and create the appropriate levels of tonality throughout the image, 
resulting in an image in which details are present in both highlights and shadows.

This functionality is provided in addition to the D-Lighting functionality found in the 

Adjust

 menu.

You can use the provided pull-down menu to modify the amount of Active D-Lighting applied to your 
image. Choose from the following options:

❏

Unchanged

This option reverts back to the setting used within the camera when the image was captured.

❏

Off

This option prevents any Active D-Lighting from being applied to the image.

❏

Low

This option applies a low level of Active D-Lighting to the image and is recommended for images shot 
with very high ISO.

❏

Normal

This option applies a moderate level of Active D-Lighting to the image and is recommended for the 
majority of images.

❏

High

This option applies a high level of Active D-Lighting to the image and is recommended for images shot 
with low ISO.

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands