Nikon 25385 - Capture NX - Mac User Manual Download Page 125 | Manualshive

Page: 125 / 268

background image

Chapter 15 — Edit List

|

Introduction to the Edit List

123

q

Show/Hide
Triangles

The show/hide triangle shows and hides the contents of the section or
enhancement. Click on the triangle to toggle between showing and hiding the
contents of the associated section or enhancement.

w

Apply Checkbox

Apply checkboxes are used to turn enhancements on or off. Adjustments to an
enhancement automatically enable the corresponding Apply checkbox; to turn
the enhancement off, simply remove the check.

e

Reset Button

The

Reset

button is provided for each section within the “Develop” section and

provided for each enhancement within the “Adjust” section.

The

Reset

button reverts the active section or enhancement to the last state prior

to the current interaction. Clicking the

Reset

button within one of the sections of

the “Develop” section causes the settings within that section to revert back to their
enhancements prior to the changes you just made.

r

Delete Button

The

Delete

button is provided only for enhancements within the “Adjust” section.

Clicking on the

Delete

button will remove that enhancement from the “Adjust”

section or will remove the selection created within the “Selection Information”
section of a step within the “Adjust” section.

«
...
123
124
125
126
127
...
»

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Related manuals for 25385 - Capture NX - Mac

Brand: Canon Pages: 153

Brand: Canon Pages: 132

Brand: Canon Pages: 135

Brand: Canon Pages: 198

Brand: Canon Pages: 98

NETWORK SATELLITE SERVER 4.0.5

Brand: Red Hat Pages: 82

MAGICTWINXP-R10

Brand: JETWAY Pages: 43

Brand: Campbell Pages: 16

AMD-8151 HyperTransport AGP3.0

Brand: AMD Pages: 16

Brand: FARONICS Pages: 43

Brand: MACROMEDIA Pages: 232

Brand: GE Pages: 82

Brand: TeleType GPS Pages: 64

GPS Navigator v4.1

Brand: TeleNav Pages: 29

Ramp Preview Controller

Brand: ARRI Pages: 46

BRIGHTMAIL GATEWAY SMALL BUSINESS EDITION

Brand: Symantec Pages: 4

Brand: Symantec Pages: 30

Brand: FieldServer Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands