Nikon 25385 - Capture NX - Mac User Manual Download Page 126 | Manualshive

Page: 126 / 268

background image

124

Chapter 15 — Edit List

|

Version

Version

The

Version

menu can now be found at the top of the

Edit

List

palette, providing you with direct control of this

powerful feature. Versions represent an advanced way of
working with and maintaining a number of different
versions of the same image within one image file. Two
different types of versions are available, and access to these
versions is provided within this menu.

The current version is displayed within the

Version

menu,

click on the menu to access one of the other versions.

The

Version

menu provides you with the following options:

Original

The

Original

version is always present within the

Version

menu and provides you with a quick way of

reverting the image to its original state, prior to any changes that were made within Capture NX 2. With NEF
RAW files, the original version will revert all settings to the state as set by the camera at the time of capture.

Last Saved

The

Last Saved

version becomes available within the

Version

menu for NEF files as soon as the image is

saved. This version provides you with the ability to revert the

Edit List

to its state at the point of the last

save.

(Current)

The

(Current)

version is temporarily available whenever changes have been made to an image and the

Version

menu is switched to another version. This version enables you to toggle quickly from one of the

available versions back to the current state to review the differences made between that version and the
current state.

New Version…

To create a custom version, select the

New Version…

option from the

Version

menu. After selecting

New

Version…

, enter a name for the new version and click

OK

.

An entry will be added to the

Version

menu with that

name containing the state of the

Edit List

palette at the

time that the version was created. Due to the non-
destructive nature of Capture NX 2, you are able to create
virtually unlimited number of versions, switch from one version to the next, and save those versions for
future use, all without altering the original image information.

Edit Versions

You can also edit the custom versions that were added, providing you with the ability to rename or delete
the custom versions listed in the

Version

menu. Select the

Edit Versions

option from the

Version

menu,

highlight the version you would like to alter, and then select either the

Rename

or

Delete

button.

«
...
124
125
126
127
128
...
»

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Related manuals for 25385 - Capture NX - Mac

Brand: Barco Pages: 31

Brand: Xerox Pages: 204

OneVision DEFINITY G3 Fault Management and integration

Brand: AT&T Pages: 153

Brand: BrainMaster Pages: 14

NI Spectral Measurements Toolkit

Brand: National Instruments Pages: 35

Auto Configuration Server Vantage Access

Brand: ZyXEL Communications Pages: 113

STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2

Brand: Juniper Pages: 5

Brand: Intel Pages: 43

Brand: Autodesk Pages: 10

LogiCORE 1000BASE-X

Brand: Xilinx Pages: 230

ANTI-VIRUS 5.0 - FOR NOVELL NETWARE

Brand: KAPERSKY Pages: 123

ASSIMILATOR KONNEKT

Brand: TC Electronic Pages: 18

ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE SERVER

Brand: KAPERSKY Pages: 146

ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE SERVER

Brand: KAPERSKY Pages: 214

ICD-BP150 - Ic Recorder

Brand: Sony Pages: 68

Brand: TwonkyVision Pages: 18

Brand: Pinnacle Systems Pages: 239

Brand: Joysound Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands