manualshive.com logo in svg

Nikon 25385 - Capture NX - Mac, User Manual

Share
Download
Nikon 25385 - Capture NX - Mac User Manual Download Page 133

Chapter 15 — Edit List

|

Develop Section

131

Picture Control

Images from cameras that use the color mode system can 
use either the 

Non-Picture Control

 mode or the 

Picture 

Control

 mode. Images from cameras that use the Picture 

Control system can only use the 

Picture Control

 mode.

The 

Picture Control

 options are available for cameras 

that use both the color mode and Picture Control systems.

The controls provided within the 

Picture Control

 option 

are:

❏

Picture Control Mode

Nikon’s unique Picture Control system makes it possible 
to share image processing settings among compatible 
devices and software. Picture Controls adjust image 
processing settings, or enable you to make 
independent adjustments to sharpening, contrast, 
brightness, saturation, and hue. These settings can be 
saved under new names as custom Picture Controls to 
be recalled or edited at will.

Custom Picture Controls can also be saved to a memory 
card for use in compatible software, and software-
created Picture Controls can be loaded into the camera. Any given set of Picture Controls will produce 
nearly the same results on all cameras that support the Nikon Picture Control system.

The 

Picture Control

 option provides five different modes to choose from. Choose between:

A

Please note

: In Picture Control mode, you can add optional Picture Controls downloaded from Nikon 

websites. Note that any optional Picture Controls used on the camera must also be installed on the computer. 
If you attempt to open an image containing a Picture Control that has not been installed, a dialog will be 
displayed warning that the 

Standard

 Picture Control will be applied. Click 

OK

 to open the image.

Unchanged

This is available only for cameras that utilize the Picture Control system and 
allows you to select the settings set within the camera at the time the image 
was captured.

Standard

Standard processing for balanced results.

Neutral

Minimal processing for natural results.

Vivid

Pictures are enhanced for a vivid, photoprint effect.

Monochrome

Convert pictures to monochrome photographs.

D2XMODE 1
D2XMODE 2
D2XMODE 3

A set of three optional Picture Controls that produce results similar to the 
corresponding “Color mode” settings for the D2X and D2XS.

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands