Nikon 25385 - Capture NX - Mac User Manual Download | Manualshive

Page: 164 / 268

background image

162

Chapter 18 — File Menu

|

Save As…

Compression

Choose from two different compression options:

❏

None

This option does not compress the image information.

❏

LZW

This option employs a lossless compression scheme based on the LZW compression algorithm.

Bit Depth

Choose to save your image either as an 8 or 16-bit per channel image.

A

Please note

: The 16-bit option is not available for CMYK TIFF images, and you may only save the image as a 16-

bit image if the original image was 16-bit.

Embed ICC Profile

Check this box if you would like to embed the current profile in your image. It is recommended that you
leave this box checked unless your printer requests that you do not embed the color profile in the image.

JPEG

Quality

Choose from

Highest Compression Ratio

,

Good

Compression Ratio

,

Good Balance

,

Good Quality

, or

Excellent Quality

settings. The higher the quality, the

larger the file size.

❏

Quality

The Quality slider provides you with more control over
the level of compression that is used when saving the
image in the JPEG Format.

Embed ICC Profile

Check this box if you would like to embed the current profile in your image. It is recommended that you
leave this box checked unless your printer requests that you do not embed the color profile in the image.
The higher the compression, the smaller the file but the greater the chance of image degradation.

Shortcut

Ctrl + Shift + S (Windows)

c shift + S (Macintosh)

«
...
162
163
164
165
166
...
»

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Reviews:

No comments

Related manuals for 25385 - Capture NX - Mac

DL385 - ProLiant - G5

Brand: XenSource Pages: 313

BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...

Brand: CA Pages: 69

RayTech RNS 5.0

Brand: Raymarine Pages: 152

PROLIANT 56976839

Brand: HP Pages: 16

ProLiant Power Interface Control Utility

Brand: HP Pages: 10

Brand: HP Pages: 181

ProLiant SL160s

Brand: HP Pages: 8

Brand: HP Pages: 245

ProBook 6445b - Notebook PC

Brand: HP Pages: 183

ProLiant Lights Out-100

Brand: HP Pages: 60

StorageWorks 2/64 - Core Switch

Brand: HP Pages: 830

StorageWorks 2/64 - Core Switch

Brand: HP Pages: 166

Brand: HP Pages: 157

ProBook 6445b - Notebook PC

Brand: HP Pages: 230

D-NE1 - Portable Cd Player

Brand: Sony Pages: 2

Brand: Avaya Pages: 48

Brand: Lowrance Pages: 48

PSB - ADMINISTRATORS GUIDE FOR RESELLERS

Brand: F-SECURE Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands