Nikon 25385 - Capture NX - Mac User Manual Download Page 150

Page: 150 / 268

148

Chapter 15 — Edit List

Working with the Edit List

Deleting Steps and Enhancements

Steps and enhancements can be deleted independently of each other. Clicking on a step or enhancement
will cause it to become highlighted within the

Edit List

palette. You can then press the delete key on your

keyboard or select

Delete

from the

Edit

menu to clear that step or enhancement from the image.

Copying and Pasting Steps and Enhancements

Steps and enhancements can be copied directly from the

Edit List

palette and pasted into another image,

a series of images found in the browser, or into the original image.

To copy and paste steps and enhancements, follow these steps:

Select one or more steps or enhancements within

the

Edit List

palette by clicking and highlighting

them.

Navigate to the

Batch

menu and select

Copy

Adjustments

. Alternatively, you can click on the

batch menu icon located at the top of the

Edit List

palette and select

Copy Adjustments

Select another image open within the editor or select one or more images within the browser.

Navigate to the

Batch

menu and select

Paste

Adjustments

. Alternatively, you can click on the

batch menu icon located at the top of the

Edit List

palette and select

Paste Adjustments

. If you

selected images from within the browser, the

Batch

palette will be displayed, enabling you to choose the

location and file format for the processed images,

and start a batch process.

Summary of Contents for 25385 - Capture NX - Mac













































































































































































































































































Search results

Summary of Contents for 25385 - Capture NX - Mac

Reviews:

Related manuals for 25385 - Capture NX - Mac

Brands by name

Popular brands

Nikon 25385 - Capture NX - Mac, User Manual

Search results

Summary of Contents for 25385 - Capture NX - Mac

Reviews:

Related manuals for 25385 - Capture NX - Mac

Brands by name

Popular brands