NF FRA5097, Instruction Manual

Page: 67 / 192

3.5 Examples of basic operations
FRA5097 3-27
2)
Setting FRA5097
Press the following keys in the following order:
・ Setting measurement frequency (at 1.0 MHz):
OPEN OSC
(menu selection key)
CURSOR TO TOP
(function key)
OPEN 1 M ENTER
・ Setting AC amplitude (at 5 Vpeak)
ITEM OPEN 5 ENTER
・ Setting DC bias (at +1 V)
ITEM OPEN 1 ENTER
・ Deleting menu
CLEAR
・ Setting oscillator output “on”
AC/DC ON
3)
SINGLE measurement
… Press the
MEAS
key to perform measurement.
At the end of measurement, the resulting data are shown at the center of the LCD, as
indicted in Fig. 3-13.
OSC: 1.0000000000MHz 5.00 Vpeak DC 1.00 V INTEG: 10cycle HMNC: 1
SWP: 100steps/sweep CPRSN:OFF SLSWP:OFF ANAL:CH2/CH1 EQL:OFF
SWEEP STOP
1
2
3
4
5
6
*ｆ: 1.0000000000MHz
*Ｒ: -80.140 dB
*θ: +4.80 deg
SINGLE measurement
result/data
Fig. 3-13 SINGLE measurement result