NF FRA5097, Instruction Manual

Page: 124 / 192

5.1 Overview
FRA5097 5-2
5.1 Overview
5.1.1 Impedance display
Linear and logarithmic graphs display impedance, reactance, admittance, conductance and
susceptance. Current to voltage conversion coefficient (0 to 1.0E+6) can also be set.
5.1.2 Open and short correction
This function reduces systematic impedance measurement errors due cable and other factors.
Before measuring impedance, the terminals are first measured at open and short states and the
resulting data stored in memory. During actual measurement, the resulting open and short data
are shown graphically.
To display impedance, set the graph unit to impedance. For details, refer to 4.1.3
Display mode.