NF FRA5097, Instruction Manual

Page: 94 / 192

4.6 Display setting
FRA5097 4-20
4.6.5 Setting phase display range
Use the menu [Graph][FORMAT][PHASE RANGE] to select one of the three phase display
ranges in the following:
[
±
180deg]
[0 - 360deg]
[-360 - 0deg]
4.6.6 Selecting display data
You can display the data which have been read out from the data memory or the USB flash drive.
The data are displayed with the optimum display range for the read out data when the [AUTO
SCALE] is set at ON, and with the display range as specified in the [SCALE] when the [AUTO
SCALE] is set at OFF.
Use the menu [Graph][DATA SELECT] to select the data storage to be read out from among
[MASS DATA], [PERMANENT DATA] and [DISK DATA].
[MASS DATA]
The data recorded in the mass data memory are selected and displayed.
The functions of function keys are the following:
[PREV] : To return to the previous page.
[NEXT] : To go to the next page.
[
↑
] : To move the cursor up by one line.
[
↓
] : To move the cursor down by one line.
[ASSIGN] : To display in the graph the data currently pointed by the cursor.
[PERMANENT DATA]
The graph recorded in the permanent data memory is selected and displayed. The functions
of function keys are the same as for the [MASS DATA].
[DISK DATA]
The data are read out from the USB flash drive and displayed. File names are displayed in
the list representation. Enter the desired data file name up to .DAT in full and press the
[YES] key. The data read out from the USB flash drive will be deleted from the data
memory when another set of data is further read out from the USB flash drive. If you want
to maintain the data, store them in the master data memory or in the permanent data memory.