NF FRA5097, Instruction Manual

Page: 118 / 192

4.17 Floppy disk operation
FRA5097 4-44
e)
RENAME … To change the file name
•
Entry of new file names
Select NEW NAME (changed file name) by using the
ITEM
key and then press
the
OPEN
key, when the list of file names is displayed. Select characters from the
TABLE to correctly form a new file name up to the external identifier (extension), and press
the
ENTER
key to define the new file name. The new file name will be displayed to the
right of NEW NAME.
•
Entry of file names to be changed and change of file names
Select the file name that you want to rename (current file name) by using the ITEM
key. Press the function key [RENAME] to execute the change of the file name.
f)
EJECT … USB
flash drive
removal
Before removing USB
flash drive
from FRA5097, be sure to press the function key
[EJECT] and check that the USB
flash drive
is not accessed, by, for instance, confirming
that the access lamp is off.
Be warned that an attempt to remove the USB
flash drive
without pressing the EJECT
button or to remove the USB
flash drive
when being accessed may destroy the unusable
USB
flash drive
.
！
CAUTION
•
Those file names that involve Japanese language or those long file names
exceeding eight alphanumeric char three extensions cannot correctly be
displayed due to mutilation. In addition, these files cannot be deleted nor
renamed.
•
Subdirectories cannot be treated. In addition, they cannot be deleted nor
renamed.
•
Press the [EJECT] button and make sure that the access lamp for the USB
flash drive
goes off before removing the USB
flash drive
.