NF FRA5097, Instruction Manual

Page: 141 / 192

6.3 File format
FRA5097 6-9
Table 6-4 b) Measurement condition file format - Condition data (continued)
166(0xa6)
short Order of harmonics analysis 1 - 10
168(0xa8) short Automatic integration mode 0:SHORT, 1:LONG
170(0xaa)
short Coherence mode 0:CH1&CH2, 1:CH1, 2:CH2
172(0xac)
short Maximum integration period for automatic integration
174(0xae) short Reference channel for amplitude compression 1:CH1, 2:CH2
176(0xb0) short Permissible error for amplitude compression 0 - 100(%)
178(0xb2) short
Maximum number of trials of amplitude compression
1 - 9,999 (times)
180(0xb4) short Compensation factor for amplitude compression 0 - 100(%)
182(0xb6)
short High-density slow sweep mode 0:MANUAL, 1:AUTO
184(0xb8) short
Reference channel for high-density slow sweep operation
1:CH1, 2:CH2
186(0xba)
short Graph style 0:SINGLE, 1:SPLIT
188(0xbc)
short (not yet used)
190(0xbe)
short Analysis mode 0:CH1/CH2, 1:CH2/CH1, 2:CH1, 3:CH2
192(0xc0) short (not yet used)
194(0xc2) short Selection number of mass data
196(0xc4) short Selection data for permanent data
198(0xc6) short Deletion number of mass data
200(0xc8) short Deletion number of permanent data
202(0xca) short
(not yet used)
204(0xcc) short
(not yet used)
206(0xce) short
(not yet used)
208(0xd0) short GPIB address 0 - 30
210(0xd2) short GPIB delimiter 0:CR/LF^EOI, 1:CR^EOI
212(0xd4) short Mass memory number to be saved in USB flash drive
214(0xd6) short Permanent memory number to be saved in USB flash drive
216(0xd8) short Clock (year) 1970 - 2069
218(0xda) short Clock (month) 1 - 12
220(0xdc) short Clock (day) 1 - 31
222(0xde) short Clock (hour) 0 - 23
224(0xe0) short Clock (minute) 0 - 59
226(0xe2) short Phase display range 0:
±
180 deg, 1:0 - 360 deg, 2:-360 - 0 deg
228(0xe4) short
Type of sweep resolution
0:Log steps/sweep, 1:Log steps/decade,
2:Lin steps/sweep, 3:Lin Hz
230(0xe6) short Type of specifying number of integrations 0:period, 1:time
232(0xe8) short Type of specifying delay time 0:period, 1:time
234(0xea) short Type of automatic integration limit value 0:period, 1:time