NF FRA5097, Instruction Manual

Page: 159 / 192

8.3 Storage, re-packaging and transportation
FRA5097 8-3
8.3 Storage, re-packaging and transportation
a)
Storage for a long period of time (when you do not plan to use the instrument
for a long time in future)
•
Remove the power supply cable from both the instrument connector and the power source
outlet.
•
Store the instrument at a dirt-free location such as on a safe shelf or in an equipment rack,
where nothing could drop down from higher place to hit the instrument.
If the instrument is subject to dirt, cover the instrument with a proper sheet.
•
Maintain the temperature and humidity of the storage location within the following range:
Temperature: -10 - +50
°
C
Humidity: 5 - 95%RH (Absolute humidity is 1 to 29 g/m
3
, avoid dew condensation.)
•
The instrument storage location shall not be such a place as having direct sunlight, near
the fire or heat source, or having wide ranges of temperature variation during storage
period. The instrument could be deformed or damages could be induced due to such
environment.
•
The instrument shall not be stored being exposed to corrosive gas, moisture, dust or dirt.
The high humidity shall also be avoided for the instrument storage. The instrument
could be corroded or damages could be induced due to such environment.
b)
Re-packaging for transportation
Observe the following when you re-pack the instrument for transportation, etc.:
•
Enclose the whole cabinet involving the instrument so that the surface is protected against
potential damages and that thin dust does not get into the inside of the instrument.
•
Use a box with appropriate strength and also with appropriate size margin.
•
Use buffer materials for packaging so that all the six external faces of the instrument body
can be protected.
•
Notify by all means to the shipping agent that the instrument inside is a precision machine,
when you order shipping.
8.4 Identification of version number
TABLE
FRA5097 – Version *.**
- Standard Version.
http://www.nfcorp.co.jp
Copyright 1989..2006 NF Corporation
Press menu, [Others], [SYSTEM] to show above window. Version appears in window at bottom
line.
Note that the version number might not always be the same even if the instrument bears the
identical type number. Since different version numbers can mean different operations or
functions, inform the agent of the version number together with the failure symptom, when you
find anomalies and request repair.
(Software options are displayed, if they exist)