NF FRA5097, Instruction Manual

Page: 150 / 192

7.1 Error messages
FRA5097 7-2
7.1 Error messages
The FRA5097 outputs two types of messages, information messages and error messages. Either
type of messages is displayed in the center of the screen when needed, information messages
being surrounded by the blue frame and error messages being surrounded by the red frame. In
event of FRA5097 error, controller can also be notified via GPIB and USB flash drive.
7.1.1 List of information messages
No. Messages Descriptions
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
0 All setups and data were lost, re-initialized
All data have been lost at the time of power
supply switching on, and therefore
re-initialization has been made.
1
Analysis frequency is limited to 15MHz
Analysis frequency is limited to 15 MHz. Note
that, even if the order of frequency harmonics is
more than one (1), analysis frequency is still
limited to 15 MHz.
2
Some parameters were corrected
When condition file is read, since some values
cannot be set, several parameters were initialized.
Use for checking actual settings.
3 ALL CONDITIONS WILL BE REPLACED! CONTINUE?
Simple condition will be loaded. Continue?
4 CONDITION DATA ON USB MEMORY WILL BE REPLACED! CONTINUE?
Simple condition will be saved. Continue?
5
USB IF is not available.
Please select with OUTPUT-SELECT menu.
The external interface is set to GPIB.
To use the FRA5097 with the USB
interface, set the external interface to
USB.
6 GPIB IF is not available.
Please select with OUTPUT-SELECT menu.
The external interface is set to USB.
To use the FRA5097 with the GPIB
interface, set the external interface to
GPIB.