NF FRA5097, Instruction Manual

Page: 140 / 192

6.3 File format
FRA5097 6-8
Table 6-4 b) Measurement condition file format - Condition data
Offset Type Descriptions (content)
40(0x28) long
Direction of valid line marker 0:horizontal direction movement,
1:vertical direction movement
44(0x2c) long Delta marker ON/OFF 0:normal marker, 1:delta marker
48(0x30) long OSC ON/OFF mode 0: Quick, 1: Slow
52(0x34) long “REPEAT” lamp 0:off, 1:on
56(0x38) long (not yet used)
60(0x3c) long Buzzer buzzing at excessive input level (over) 0:OFF, 1:ON
64(0x40) long
Measurement termination at excessive input level (over)
0:OFF, 1:ON
68(0x44) long
Oscillator output turned off at excessive input level (over)
0:OFF, 1:ON
72(0x48) long Manual sweep 0:OFF, 1:ON
76(0x4c) long Equalizing function 0:OFF, 1:ON
80(0x50) long Automatic integration function 0:OFF, 1:ON
84(0x54) long Amplitude compression function 0:OFF, 1:ON
88(0x58) long High-density slow sweep 0:OFF, 1:ON
92(0x5c) long Auto-scale 0:OFF, 1:ON
96(0x60) long Grid display 0:OFF, 1:ON
100(0x64) long Marker display 0:OFF, 1:ON
104(0x68) long (not yet used)
108(0x6c) long
(not yet used)
112(0x70) long
(not yet used)
116(0x74) long
(not yet used)
120(0x78) long
(not yet used)
124(0x7c) long
(not yet used)
128(0x80) long
(not yet used)
132(0x84) long
(not yet used)
136(0x88) long Buzzer buzzing 0:OFF, 1:ON
140(0x8c) long Open calibration function 0: off, 1: on
144(0x90) long Short calibration function 0: off, 1: on
148(0x94) long Phase invert 0:off, 1: on
152(0x98) short
Oscillator (OSC) output wave form 0:sinusoidal waveform,
1:rectangular waveform, 2:triangular waveform
154(0x9a) short (not yet used)
156(0x9c) short Sweep resolution (Log steps/decade)
158(0x9e) short Sweep resolution (Log steps/decade)
160(0xa0) short Sweep resolution (Lin steps/sweep)
162(0xa2) short Integration period (cycle)
164(0xa4) short Delay period (cycle)