NEC Express5800/A1080a, User Manual, Page: 88 / 696

Hardware
88
Hardware
This chapter describes hardware of the server.
“Names and Functions of Components” (page 90)
This section describes names and functions for each part of the server.
“Installation and Connection” (page 135)
This section describes a location suitable for installing the server, how to
mount the server on mounting a rack mount chassis, and how to connect
connecters.
“Basic Operation” (page 171)
Describes how to turn ON/OFF the power and handle DVDs, etc.
“Upgrading your server” (page 186)
Refer to this section when mounting options on the server.
“NEC EXPRESSSCOPE
®
Monitor” (page 216)
Enables a user to turn ON/OFF power of the server, to check the system
information and status, and to set various networks.
“BIOS Setup” (page 290)
Describes how to set BIOS using the dedicated utility.
“RAID System Configuration” (page 333)
Describes how to use internal hard disk drives as a RAID system with using
RAID controller (Mega RAID ROMB).
Hardware
NEC Express5800 Series
Express5800/A1080a-S, A1080a-D, A1080a-E